770CFE Irons

770 specifications
Club Loft Lie Weight Offset  LH Sole Angle  Toe Height  Heel Height  Blade Length
3-iron 21° 59.0° 239 g. 5.0 mm   1.0° 58.0 mm 33.0 mm 82 mm
4-iron 24 60.0 246 5.0 LH 1.5 59.0 33.5 82
5-iron 27 61.0 253 5.0 LH 2.0 60.0 34.0 82
6-iron 31 62.0 260 4.5 LH 2.5 60.0 34.0 82
7-iron 35 63.0 267 4.0 LH 3.0 60.5 34.5 82
8-iron 39 63.5 274 4.0 LH 3.5 61.0 35.5 82
9-iron 44 64.0 281 4.0 LH 4.0 62.0 36.0 82
PW 49 64.0 283 4.0 LH 5.0 62.0 37.0 82
AW 52 64.0 283 4.0   5.0 62.0 37.0 82
SW 55 64.0 297 3.0   12.0 63.0 39.0 82

Hosel Length 65mm on all 770 ironheads
Bore Depth 30mm in all 770 ironheads
TWGT Weight Bore in all 770 heads for final weighting
Bore Diameter 0.370" parallel
Hosel O.D. - 13.2mm
Ferrule Required Yes. Choose iron ferrule with a 13.2mm bottom O.D.
Scorelines U-groove
Head Body Mat. Investment cast from 17-4 Stainless Steel
Face Material #3, 4 (Carpenter 455 HS Steel)
#5, 6, 7 (17-7 Stainless Steel)
#8, 9, PW, SW (304 Soft Stainless Steel)
Loft/Lie Bending Yes, but we do not recommend bending more than 2° in any direction.
Sole Width Range 3-iron (19.5mm/16mm)
6-iron (21mm/17mm)
9-iron (21mm/17mm)
Sole Radius Toe to Heel 350mm (#3-PW)
250mm (SW)
Sole Radius Face to Back 50mm (#3-6)
60mm (#7-9)
70mm (PW)
80mm (SW)